Summary

The ADM-PCIE-9V8 is a Single-slot three quarter length, full height, PCI Express Add-In Card featuring the powerful and efficient AMD Virtex UltraScale Plus VU2P-3 FPGA.

Front IO with 4x QSFP-DD sockets, each supporting two 100GbE or eight 10/25GbE interfaces with highly optimized signal traces from the FPGA providing ultra low-latency communications.

8 lane PCIe Gen4 capable Interface.
System monitoring of temperature, voltage, and current giving users useful system status information and accurate feedback of power utilization for their designs.

Specification

Board Format

Environmental Specifications

Operating Humidity Range:
Up to 95% (non-condensing)

EMC:
FCC 47CFR Part 2
EN55022 Equipment Class A

Host I/F

Target Device

AMD Virtex® UltraScale Plus™
XCVU2P-3 (FSVJ2104)

FPGA Resources

FPGA Hard IP Cores

Board Management

The ADM-PCIE-9V8 houses a system monitoring chip which is able to provide real-time temperature, voltage and current readings of the system, as well as reconfigure programmable clocks and much more. The system monitor can be accessed directly through the USB interface via the front panel (or rear of board), the UART connection to the target FPGA or through the SMBus interface on the card's PCI Express edge connector. When enabled**, IPMI can also be used to communicate with the system monitor, allowing for remote communication and management with the ADM-PCIE-9V8.

** IPMI is disabled by default and should only be enabled when the board is installed in an IPMI compliant system. Please contact the factory for details on enabling IPMI on the ADM-PCIE-9V8.

Target FPGA Configuration

Onboard Flash
USB board management (built-in JTAG)
Partial Reconfig (via MCAP) Over PCIE

FPGA Configuration Flash

High-Speed Network Interfaces

Ordering Information

Related Products

Resources:

Deliverables

ADM-PCIE-9V8 Board
One-Year Warranty
One-Year Technical Support

Support

Please contact Alpha Data for full details on the available support packages for the ADM-PCIE-9V8.