Alpha Data offers a wide variety of plug- in IO modules to complement its FPGA products, providing a range of IO options to our customers.
The XRM2-DA5 is an I/O Module which provides dual channel ADC and single channel DAC interfaces.
The XRM2-RF-ATD is an XRM2 I/O module, providing two full duplex RF channels at center frequencies between 70 MHz and 6 GHz. Intended for use in FPGA-based general-purpose radio systems.
The XRM2-ADC-S11 is an XRM2 I/O Module, providing one Analog to Digital converter with 12-bit resolution and sampling rates up to 2000Msps (2500Msps with order code option /25).
The XRM2-ADC-D10/250 is an XRM2 I/O Module, providing two Analog to Digital converters with 16-bit resolution at sampling rates up to 250Msps.
The XRM-ADC-Q8/250 is an XRM2 I/O Module, providing four Analog to Digital converters with 14-bit resolution at sampling rates up to 250Msps.
The XRM2-ADC-S4/3G is an XRM2 I/O Module, providing one Analog to Digital converter with 8-bit resolution and sampling rates up to 3Gsps.
The XRM2-DAC-D4/1G is an XRM2 I/O Module, providing two Digital to Analog converters with 16-bit resolution and sampling rates up to 1GHz.
The XRM2-CLINK-R-GIGE is an XRM2 I/O Module which provides an industry standard CameraLink interface and an RGMII interface to a 10/100M or 1Gig Ethernet port.
The XRM2-CLINK-MINI-RX is an I/O Module which provides an industry standard CameraLink interface with cameralink deserialisers on the XRM2.
The XRM2-CLINK-GIGE is an I/O Module which provides an industry standard CameraLink interface and a 10/100M or 1Gig Ethernet port.
The XRM2-CLINK-MINI is an XRM2 I/O Module which provides an industry standard (base/dual/full) CameraLink interface.
The XRM2-OPT is an XRM2 I/O Module which provides a variety of multi-gigabit communications options.
The XRM2-FCN is an XRM2 I/O Module which provides eight full-duplex high-speed serial communication channels.
The XRM2-FPDP is an XRM2 I/O Module which provides a Front Panel Data Port Interface.
The XRM2-HSSDC2A is an XRM2 I/O Module which provides 4 HSSDC2 high speed serial connectors.
The XRM2-RS485 is an XRM2 I/O Module which provides a Front Panel RS485 Interface.
The XRM2-SPW is an I/O Module which provides SpaceWire Interface capability for Alpha Data FPGA cards.
The XRM2-IO146 is an XRM2 I/O Module which provides up to 146 LVDS/LVTTL I/O via a Mictor 152pin connector.
The XRM2-IO146-ROCKET is an XRM2 I/O Module which provides seven High Speed Serial I/O and up to 116 LVDS/LVTTL I/O via a Mictor 152pin connector.
The XRM2-IO34 is an XRM2 I/O Module which provides up to 34 LVDS/LVTTL I/O via a SCSI-2 68pin connector.
The XRM2-IO64 is an XRM2 I/O Module which provides up to 64 LVDS/LVTTL I/O via the SCSI-2 68pin connector.
The FMC-PLUS-QSFP-DD is an FMC+ I/O module, providing three QSFP-DD cages. Each cage supports eight bi-directional high speed serial channels up to 28Gbps, allowing support for standard protocols suc...
The FMC-DA4 is an FMC I/O Module, providing two Analog to Digital converters with 14-bit resolution and sampling rates up to 3Gsps, and two Digital to Analog converters with 16-bit resolution and ...
The FMC-RCP-10G is an FMC I/O Module with up to four 10Gb/s Optical transceiver channels.
The FMC-RCP-4G is an FMC I/O module with up to four 4Gb/s Optical transceiver channels.
The FMC-CAMERALINK is an FMC I/O Module which provides an industry standard CameraLink interface.
The FMC-IPASS is an FMC I/O Module which provides an industry standard High-Speed Serial interface.
The AD-PCIE-FQSFP is an adaptor card to allow the conversion of the onboard Firefly interfaces to externally accessible QSFP28 cages.
The ADM-VPX3-9Z2-RTM is a 3U, VPX, Rear Transition Module (RTM) designed to interface with Alpha Data ADM-VPX3-9Z2 Zynq Ultrascale+ FPGA board.
The ADM-VPX3-9Z5-RTM is a 3U, VPX, Rear Transition Module (RTM) designed to interface with Alpha Data ADM-VPX3-9Z5 Zynq Ultrascale+ FPGA board.