Specification
Board Format
XMC (Switched Mezzanine Card, VITA 42)
Environmental Specifications
Temperature Limits | Operating Temperature Range | Storage Temperature Range |
|---|
| Min | Max | Min | Max |
|---|
| AC0 | Air Cooled Commercial | 0°C | +55°C | -40°C | +85°C |
| ACE | Air Cooled Extended | 0°C | +70°C | -55°C | +100°C |
| AC1 | Air Cooled Industrial | -40°C | +70°C | -55°C | +100°C |
| CC0 | Conduction Cooled Commercial | 0°C | +55°C | -40°C | +85°C |
| CCE | Conduction Cooled Extended | 0°C | +70°C | -55°C | +100°C |
| CC1 | Conduction Cooled Industrial | -40°C | +70°C | -55°C | +100°C |
Operating Humidity Range:
Up to 95% (non-condensing)
Host I/F
Ethernet, PCI Express or USB
Target Device
AMD Series 7 Zynq®
XC7Z045, XC7Z100 (FFG900)
FPGA Resources
| Chosen Device | FFs | LUTs | DSPs | BRAM |
|---|
| XC7Z045 | 437k | 218k | 900 | 19.2Mb |
| XC7Z100 | 554k | 277k | 2020 | 26.5Mb |
FPGA Hard IP Cores
2x ARM® Cortex™-A9 MPCore™ up to 1GHz
1x PCIe® Gen2 x8
2x Tri-mode Gigabit Ethernet
2x USB 2.0
On Board Memory
| Memory Type | No. Banks | Memory Size (per bank) |
|---|
| SDRAM | 1 | 512MB DDR3 - (Connected to PS - Option for 1GB) |
| SDRAM | 2 | 256MB DDR3 - (Connected to PL) |
| microSD | 1 | SD Card specific SDC - (Connected to Ps) |
Target FPGA Configuration
Flexible boot options from on-board SPI Flash or uSD Flash
FPGA Configuration Flash
| Flash Type | Flash Size |
|---|
| QSPI | 512MBit |
On-board Clock Specifications
33MHz reference clock for the Zynq ARM Cortex-A9 MPCore processorsLow-jitter 250MHz reference clock, suitable for SerDes applicationsLow-jitter programmable reference clock, suitable for SerDes applicationsLow-jitter 200MHz reference clock suitable for IOB delay circuitsCustom clock inputs available through the XRM2 interface
I/O Interfaces
| Interface Type | Qty | Description |
|---|
| FRONT I/F I/O (XRM2 I/F) |
| Discrete Digital | 146 | LVCMOS/LVDS I/O |
| HSSIF | 8 | High-Speed Serial Links |
| ON-BOARD I/O (On-board) |
| Comms | 1 | microUSB Interface
Connector: microUSB connector
|
| Configuration | 1 | JTAG Interface
Connector: PCB Header
|
| REAR I/F I/O (P6) |
| HSSIF | 2 | Gigabit Ethernet Interfaces |
| Comms | 2 | USB Ports |
| Comms | 2 | RS-232 and RS-485 Ports |
| Discrete Digital | 38 | LVCMOS 3.3V GPIO connections (VITA 46.9 X8d+X12d+X38s compatible pinout) |
| HSSIO | 8 | High-SPeed Serial Links |
