Summary

The ADM-XRC-9R1 is a high-performance System On Module (SOM) based on the AMD Zynq Ultrascale+ RFSoC, which combines FPGA Fabric, ADC and DAC interfaces and ARM CPU cores in a single low-power device.

The module is provided in rugged XMC format and is available in Industrial temperature grades with Air or Conduction Cooling.

Applications

RF Signal Sampling/Generation
Radar
Beamforming
MIMO (5G) communications Tx and Rx
Signal Detection/Jamming

Board Features

8 ADC and DAC channels capable of Multi-Gigasample data conversion
AMD Ultracale+ re-configurable logic and DSP processing
AMD Zynq ARM multi-core control and computation Processing System
30MHz to 4GHz front-end bandwidth

FPGA Features (Hard IP)

8x 12/14 bit 4/5 GSPS RF-ADC
8x 14 bit 6.5/10 GSPS RF_DAC
4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
2x ARM® Cortex™-R5 MPCore™ - 533MHz
8x SD-FEC cores (ZU28/ZU48 only)
1x PCIe Gen3x8 in Fabric
1x PCIe Gen2x4 to ARM PS

Specification

Board Format

XMC (Switched Mezzanine Card, VITA 42)

Environmental Specifications

Temperature Limits
Operating Temperature RangeStorage Temperature Range
MinMaxMinMax
AC1Air Cooled Industrial-40°C+70°C-55°C+100°C
CC1Conduction Cooled Industrial-40°C+70°C-55°C+100°C

Operating Humidity Range:
Up to 95% (non-condensing)


Host I/F

2x1GigE and 2 UART(P4)
PS - PCI Express Gen2 x4 (P5)
PL - PCI Express Gen3 x8 (P6)
or up to 8x10 GigE (P6)
or up to 2x100 GigE (P6) /V88 option required


Target Device

AMD Zynq® Ultrascale+
XCZU27DR-2, XCZU28DR-2, XCZU47DR-2, XCZU48DR-2 (FFVE1156)

FPGA Resources

Chosen DeviceDSPsBRAMURAM
XCZU27DR-2427238Mb22.5Mb
XCZU28DR-2427238Mb22.5Mb
XCZU47DR-2427238Mb22.5Mb
XCZU48DR-2427238Mb22.5Mb

FPGA Hard IP Cores

8x 12/14 bit 4/5 GSPS RF-ADC
8x 14 bit 6.5/10 GSPS RF_DAC
4x ARM® Cortex™-A53 MPCore™ - 1.5GHz
2x ARM® Cortex™-R5 MPCore™ - 533MHz
8x SD-FEC cores (ZU28/ZU48 only)
1x PCIe Gen3x8 in Fabric
1x PCIe Gen2x4 to ARM PS

On Board Memory

Memory TypeNo. BanksMemory Size (per bank)
SDRAM116Gb DDR4 - 32bits wide (to PS)
SDRAM28Gb DDR4 - 8bits wide (to PL)
microSD1SD Card specific SDC - (Connected to Ps)

Target FPGA Configuration

PS - Configured via QSPI or uSD


FPGA Configuration Flash

Flash TypeFlash Size
QSPI2x512Mb

On-board Clock Specifications

250MHz Reference Clock- HSSIO MGTs
Programmable Clock (150MHz default)
300MHz Reference Clock (DDR4)
300MHz Fabric Clock
25MHz Reference Clock (Ethernet)
50MHz Reference Clock (PS Core)
External Analog Reference Clock (from XMM)


I/O Interfaces

Interface TypeQtyDescription
ANALOG I/O (Front I/O)
High-Frequency Analogue Inputs812/14-bit 4/5GSPS RF-ADC
Connector: CMM Micro connectors
High-Frequency Analogue Outputs814-bit 6.5/10GSPS RF-DAC
Connector: CMM Micro connectors
DISCRETE I/O (Front I/O)
High-Speed Digital IO2Reference Clocks and Synchronization
Connector: MCX Connectors
DISCRETE I/O (P6)
Low-Speed Digital IO19GPIO (19 single-ended)
REAR I/F FROM PS I/O (P4)
Low-Speed Serial IO2Two x 1 Gigabit Ethernet Ports
Low-Speed Serial IO22 USB Interfaces
Low-Speed Serial IO22 Serial Comms Ports
REAR I/F FROM PL I/O (P6)
High-Speed Serial IO8HSSIO Links - 10/25/40/100G Ethernet or PCI Express Gen3 x8
ONBOARD COMMS I/O (Onboard)
Onboard USB Comms1USB Interface
Connector: USB connector

Ordering Information

Ordering Code
ADM-XRC-9R1(d)(x)(c)(a)
ParameterCodeParameter Description
Deviced/Z27 = XCZU27DR-2,
/Z28 = XCZU28DR-2,
/Z47 = XCZU47DR-2,
/Z48 = XCZU48DR-2
XMC Connectorxblank = VITA42 XMC, /V88 VITA88 XMC+
Coolingc/AC1 = air cooled industrial,
/CC1 = conduction cooled industrial
Conformal Coatingablank = no conformal coating,
A = Acrylic,
P = Polyurethane

Available Accessories

CAB-ADC-PCIE-XMC/7Z1 - A cable which breaks out the critical interface from the XMC P4 socket of the 9R1, through the ADC-PCIE-XMC, to industry standard plugs (RJ45, USBA, and DB9).

CAB-9R1/SMA/150 - A breakout cable expanding the Nicomatic CMM Mini-Coax connections to SMA, 150mm in length.

Contact Alpha Data for further details.



Related Products

ADC-XMC-STANDALONE

ADC-XMC-STANDALONE

Standalone carrier for XMC System-on-Module

The ADC-XMC-STANDALONE is a standalone breakout adapter for Alpha Data XMCs. A personality wiring card matches the XMC pinout to route through to the breakout interfaces.

View Product

ADC-PCIE-XMC3

ADC-PCIE-XMC3

XMC adapter for PCI-Express workstations.

The ADC-PCIE-XMC3 is a three quarter length PCI Express card designed to carry a single XMC.

View Product

Resources:

Reference Designs: (RD-9R1)

The RD-9R1 contains a suite of Vivado and Vitis/xSDK reference designs demonstrating how to use the board, in an embedded ARM CPU standalone configuration and in a PCIe-centric mode. An ARM CPU-centric Targetted Reference Design is the primary example, but additional examples include a Gen3x8 P6 PCIe demonstration. The RD-9R1 is compatible with the ADS-STANDALONE/9R1 and ADA-VPX3-9R1.

PCIe examples are compatible with the ADXDMA Driver and API.

Download Reference Designs [Login Required]

Download the ADXDMA Driver [Login Required]


Deliverables

ADM-XRC-9R1 Board
One-Year Warranty
One-Year Technical Support

Support

Please contact Alpha Data for full details on the available support packages for the ADM-XRC-9R1.

Sales Questions

Sales Questions

For any sales questions please e-mail us at sales@alpha-data.com

Sales Questions

Technical Support

For any technical questions please e-mail us at support@alpha-data.com

Get in touch and request a quote


Contact Us